20200518_090327 copy.png
sterilyft_logo_transparent.png

Breathe easy... We're clearing the air on elevator sterilization

Patent Pending

  • LinkedIn
  • Facebook
  • YouTube
  • Twitter
 
 
LABEL.jpg
OGS.png
johnstone.png

APPROVED NYS OGS

COVID RESPONSE PRODUCTS

MBE.jpg

Sterilyft is a complete elevator cab air purifying and sterilizing solution based on systems used in hospital sterile rooms.

Social distancing in typical elevators is difficult at best. Manually sanitizing elevators is nearly impossible since they rarely stop moving. CEC Elevator Cab Corp has leveraged their more than 25 years of experience as a loyal provider, manufacturer and developer of elevator cabs, elevator cab accessories and products to engineer and produce a system to help lessen the risks caused by the enclosed elevator space. Patent pending SteriLyft works continuously using special filtration and UV-C light to help “clean the air” throughout the day, 24/7.  CEC Elevator Cab Corp proudly offers to be your elevator air sterilization manufacturer

filter.png
uvc.png
fan.png
flexible.png

Double Filtration

UV-C Light

710 CFM Fan

Flexible Design

Sterilyft contains uses two MERV 13 certified filters

UV-C light irradiates up to 99.9% of germs

Full volume of air is circulated and sterilized roughly twice per minute

Able to be mounted anywhere on the outside of the cab

WINNER!

NYC DOB Innovation Challenge 2020

DOB Image.png

"Hack the Code 2020"

American flag waving

Proudly made and assembled in the Bronx, NY, USA

CEC Elevator Cab  & Door Corp

(718) 328-3632

Copy%20of%20elcon-logo-header_edited.png

Sterilyft is honored to be hilighted in Elcon's video of suggested elevator & escalator risk mitigation products.  Click below to see video

INTRODUCING STERILROOM

The same great technology and performance of Sterilyft, made for superior Indoor Air Quality treatment to ANY space.  Each system based on 10,000 cubic feet of air space.  Contact us today to learn more

STERILROOM – ROOM FILTRATION AND STERILIZATION SYSTEM.jpg
STERILROOM-Model.jpg

Watch our television interview as seen on WWOR and WPIX "Inside the Blueprint"

CLIENTS

elcon-logo-header.png
vornado_logo.png
kone_logo_white.png
 

HOW IT WORKS

Sterilyft, utilizes the HVAC technology of forced air and a semi-closed loop system, with the filtration technology of double MERV 13 filters and the germicidal effect of UV-C radiation to help move air and contaminants away from the public, Filter the air to maximum quality and disinfect to the best possible extent with the UV-C source. Studies have shown UV-C alone accomplishes 99.999% disinfection.  The “cleaned” air is circulated back into the elevator and circulated continually always cleaning and providing fresh, sterilized and filtered air.  

What makes Sterilyft uniquely different than other systems is that 1. Sterilyft actually creates a circulation of air, removing the contaminated air and replacing with clean, sanitized air. 2. Sterilyft does not use shaftway air.  In fact, with semi closed loop, the shaft is sealed away from the system's components.  3. Sterilyft does not add any bi-products or chemicals to the cab air, such as other systems that may add moisture creating ions or ozone which is a natural byproduct of ion generation.  4. Sterilyft is designed for superior exchanging of air with an industry leading 710 cfm fan.  5. Sterilyft will  remove contaminants and particles from  inside the cab.  Other systems may leave in the cab, only to be swept out onto the occupied floors the elevator serves when doors open,  6. By not being open to shaft, Sterilyft is not subject to the negating pressures of shaftway movement and, Sterilyft would not increase the risk of adding smoke into the cab in the event of a shaftway smoke condition.

Sterilyft has been tested by Underwriter's Laboratory (UL) in a one month, 3rd party, air quality monitoring study for side by side comparison of two active passenger elevators in Virginia,  UL's data shows Sterilyft's superior performance over that of a standard exhaust fan equipped elevator with results as:

Removal of particulate matter 10 microns or less (PM10):        95.5% less contaminants

Removal of particulate matter 2.5 microns or less (PM2.5):      95.79% less contaminants

Removal of particulate matter 1 micron or less (PM1):             97.46% less contaminants

Removal of particulate matter .3 microns or less (PM>0.3):      89.21% less contaminants

Removal of Volatile Organic Compounds (VOC):                        32.7% less content (284 ug/m3 average - US Green Building Council requirement <500 ug/m3)

                       CLICK                                      to view UL Air Monitoring Test

In addition to the high efficiency filtration of the air, we have calculated based on measured air speed in UVC chamber, time of exposure and on calculated radiance intensity and irradiance of the UVC lamp our UVC dosage (or fluence) to be over 20 mJ/cm2.  This dosage is currently being tested by a Nationally Recognized Testing Laboratory (NRTL) Intertek to verify efficacy to bacterial and viral pathogens.  Current research studies suggest SARS-CoV-2 (virus which causes COVID-19) is effectively inactivated by a dosage of 10 to 20 mJ/cm2.

1

Fan moves air out the top of the elevator

2

Sterilyft filters and sanitizes the air

3

Air is continually circulated from base to canopy

diagram.png

CLINK BELOW TO SEE THE STERILYFT DIFFERENCE FROM NON-CIRCULATING SYSTEMS

CLINK BELOW FOR STERILYFT'S REPORT AND OBSERVATIONS ON ELEVATOR AIR CONDITIONS AND GERMICIDAL TREATMENTS

BOEDC CITE.jpg
 

INSTALLATION

MAINTENANCE

Fast and simple installation

Replaceable filters - Semi Annual

Designed to be mounted anywhere on the outsite of the cab

Replaceable UV-C lightbulb - Annual

Custom mounting options available if needed

WARNING: UV-C light is dangerous, when performing maintenance ensure light is turned off.
3 safety provisions (indicator light, Danger labels, Lights automatically shut off when door is opened)

Crosshead adjustable mount bracket included

Shop for replacement parts
 

SPECS

Dimensions

BEDPLATE FOOTPRINT

12" x 26 1/2"

14” x 30” clearance suggested for proper install

HEIGHT

10 1/4”

 "

WEIGHT

Approx. 25 lb

Approx 30-35 lb with ducts

Filter

MERV RATING

MERV 13

FPR RATING