top of page
Overview
APPROVED NYS OGS
COVID RESPONSE PRODUCTS
Sterilyft is a complete elevator cab air purifying and sterilizing solution based on systems used in hospital sterile rooms.
Social distancing in typical elevators is difficult at best. Manually sanitizing elevators is nearly impossible since they rarely stop moving. CEC Elevator Cab Corp has leveraged their more than 30 years of experience as a loyal provider, manufacturer and developer of elevator cabs, elevator cab accessories and products to engineer and produce a system to help lessen the risks caused by the enclosed elevator space. US patented SteriLyft works continuously using special filtration and UV-C light to help “clean the air” throughout the day, 24/7. CEC Elevator Cab Corp proudly offers to be your elevator air sterilization manufacturer
Double Filtration
UV-C Light
710 CFM Fan
Flexible Design
Sterilyft contains uses two MERV 13 certified filters
UV-C light irradiates up to 99.9% of germs
Full volume of air is circulated and sterilized roughly twice per minute
Able to be mounted anywhere on the outside of the cab
INTRODUCING STERILROOM
The same great technology and performance of Sterilyft, made for superior Indoor Air Quality treatment to ANY space. Each system based on 10,000 cubic feet of air space. Contact us today to learn more
Watch our television interview as seen on WWOR and WPIX "Inside the Blueprint"
How it works
HOW IT WORKS
Sterilyft, utilizes the HVAC technology of forced air and a semi-closed loop system, with the filtration technology of double MERV 13 filters and the germicidal effect of UV-C radiation to help move air and contaminants away from the public, Filter the air to maximum quality and disinfect to the best possible extent with the UV-C source. Studies have shown UV-C alone accomplishes 99.999% disinfection. The “cleaned” air is circulated back into the elevator and circulated continually always cleaning and providing fresh, sterilized and filtered air.
What makes Sterilyft uniquely different than other systems is that 1. Sterilyft actually creates a circulation of air, removing the contaminated air and replacing with clean, sanitized air. 2. Sterilyft does not use shaftway air. In fact, with semi closed loop, the shaft is sealed away from the system's components. 3. Sterilyft does not add any bi-products or chemicals to the cab air, such as other systems that may add moisture creating ions or ozone which is a natural byproduct of ion generation. 4. Sterilyft is designed for superior exchanging of air with an industry leading 710 cfm fan. 5. Sterilyft will remove contaminants and particles from inside the cab. Other systems may leave in the cab, only to be swept out onto the occupied floors the elevator serves when doors open, 6. By not being open to shaft, Sterilyft is not subject to the negating pressures of shaftway movement and, Sterilyft would not increase the risk of adding smoke into the cab in the event of a shaftway smoke condition.
Sterilyft has been tested by Underwriter's Laboratory (UL) in a one month, 3rd party, air quality monitoring study for side by side comparison of two active passenger elevators in Virginia, UL's data shows Sterilyft's superior performance over that of a standard exhaust fan equipped elevator with results as:
Removal of particulate matter 10 microns or less (PM10): 95.5% less contaminants
Removal of particulate matter 2.5 microns or less (PM2.5): 95.79% less contaminants
Removal of particulate matter 1 micron or less (PM1): 97.46% less contaminants
Removal of particulate matter .3 microns or less (PM>0.3): 89.21% less contaminants
Removal of Volatile Organic Compounds (VOC): 32.7% less content (284 ug/m3 average - US Green Building Council requirement <500 ug/m3)
CLICK to view UL Air Monitoring Test
In addition to the high efficiency filtration of the air, we have calculated based on measured air speed in UVC chamber, time of exposure and on calculated radiance intensity and irradiance of the UVC lamp our UVC dosage (or fluence) to be over 20 mJ/cm2. This dosage is currently being tested by a Nationally Recognized Testing Laboratory (NRTL) Intertek to verify efficacy to bacterial and viral pathogens. Current research studies suggest SARS-CoV-2 (virus which causes COVID-19) is effectively inactivated by a dosage of 10 to 20 mJ/cm2.
1
Fan moves air out the top of the elevator
2
Sterilyft filters and sanitizes the air
3
Air is continually circulated from base to canopy
CLINK BELOW TO SEE THE STERILYFT DIFFERENCE FROM NON-CIRCULATING SYSTEMS
CLINK BELOW FOR STERILYFT'S REPORT AND OBSERVATIONS ON ELEVATOR AIR CONDITIONS AND GERMICIDAL TREATMENTS
Installation & Maintenance
INSTALLATION
MAINTENANCE
Fast and simple installation
Replaceable filters - Semi Annual
Designed to be mounted anywhere on the outsite of the cab
Replaceable UV-C lightbulb - Annual
Custom mounting options available if needed
WARNING: UV-C light is dangerous, when performing maintenance ensure light is turned off.
3 safety provisions (indicator light, Danger labels, Lights automatically shut off when door is opened)
Crosshead adjustable mount bracket included
Specs
SPECS
Dimensions
BEDPLATE FOOTPRINT
12" x 26 1/2"
14” x 30” clearance suggested for proper install
HEIGHT
10 1/4”
"
WEIGHT
Approx. 25 lb
Approx 30-35 lb with ducts
Filter
MERV RATING
MERV 13
FPR RATING
FPR 10
MPR RATING
MPR 1500-1900
UVC Germicidal Flourescent Lamp
LIFESPAN
8000 hr
WAVELENGTH
254 nm
BASE
G5
POWER
110 VAC, 4.5W, 29V, 0.17A
Fan
POWER
110 VAC
-
BEARING
Dual axial ball bearings
-
NOISE LEVEL
38-62 dBa
in variable speeds
MAXIMUM SPEED
710 CFM
-
VARIABLE SPEED
15%, 23%, 50%, 67%, 83%, 100%
-
SPEED CONTROL
Wireless remote or hard wired dial
hard-wired dial installed on top of cab
MAXIMUM OPERATING PRESSURE
520 Pa
-
OPERATING ENVIRONMENT
10ºF-140ºF, Humidity up to 90%
-
IP RATING
IPx4
-
***SEE Main products for 220V model NOW AVAILABLE***
CERTIFICATIONS
ETL Listed (Intertek) 5018675 - Conforms to UL Standard 507, CSA Standard C22.2 #187
California Air Resource Board (CARB) Certified - EO Number G-20-233
Intertek Antimicrobial Efficacy Tested
What's Included
Fan
Ducting
Controls (remote/hard-wired)
Filters (x2)
Mounting hardware
Installation and maintenance instructions
UV-C Lightbulb
Warranty information
Cross head universal mount brackets
Sources
STUDIES
Centers for Disease Control and Prevention
COVID-19 Employer Information for Office Buildings
With permission of CDC
Canadian Journal of Infection Control
UV-C Light and Infection Rate in a Long Term Care Ventilator Unit
With permission of IPAC Canada; Canadian Journal of Infection Control | Spring 2018 | Volume 33 | Issue 1 | 44-48
Binghamton University
NSF Funds BME Team's UV Sterilization Research for Respirator Masks
With permission of Binghamton University, State University of New York
bottom of page